Directed Electronics Rattler 259D User Manual page 35

To remote start the vehicle:
1. Simultaneously press
second.
2. The parking lights will flash to confirm remote start opera-
tion.
3. Once the vehicle has started, it will run for the pre-program-
med period of time (12 or 24 minutes) or until a shutdown
input is triggered.
When you are ready to drive the vehicle:
1. Insert the ignition key and turn it to the ON position.
2. Press the brake pedal.
note: If the brake pedal is pressed before the key is in the
ON position, the engine will shut down.
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut
down the engine if the system receives any of the following shut-
down inputs:
The brake pedal is pressed.
The hood is opened.
The shutdown toggle switch is put into the ON position.
The pre-programmed run time has elapsed.
Buttons and
To shut down the remote start and turn off the engine:
Step on the brake pedal, or
Press and
32
and on the transmitter for one
are pressed again.
for one second.
© 2002 directed electronics, inc.