Pc Status Read Commands; Cr_Fsync Command; Cr_Tdots Command; Cr_H-Pos Command - Sanyo PDG-DWL100 - WXGA DLP Projector Command Manual

PDG-DWL100 Expand Serial Command Functional Specifications

9.5 PC Status Read Commands

9.5.1

CR_FSYNC Command

Command "CR_FSYNC" [CR]
Details Get value of Fine Sync
Acceptable
Correspondence
Unacceptable
9.5.2

CR_TDOTS Command

Command "CR_TDOTS" [CR]
Details Get value of Total Dots
Acceptable
Correspondence
Unacceptable
9.5.3

CR_H-POS Command

Command "CR_H-POS" [CR]
Details Get value of Horizontal Position
Acceptable
Correspondence
Unacceptable
9.5.4

CR_V-POS Command

Command "CR_V-POS" [CR]
Details Get value of Vertical Position
Acceptable
Correspondence
Unacceptable
"000_%1" [CR]
%1 "0000-0031" ------ Directly specify setting value of Fine sync
"Error Code" [CR] -------------- When command is invalid in
the given condition
"?" [CR] --------- When unknown command is received
"000_%1" [CR]
"-005" – " 0005"
%1
(nnnn = Display Dots + Horizontal Position)
"Error Code" [CR] ---- When command is invalid in the
"?" [CR] --------- When unknown command is received
"000_%1" [CR]
"-005" – " 0005"
%1
(nnnn = Total Dots - Display Dots)
"Error Code" [CR] ---- When command is invalid in the
"?" [CR] --------- When unknown command is received
"000_%1" [CR]
"-005" – "0005"
%1
(nnnn = Total Line - Display Line)
"Error Code" [CR] ---- When command is invalid in the
"?" [CR] --------- When unknown command is received
32 / 47
given condition
given condition
given condition