Pc Status Read Commands; Cr_Fsync Command; Cr_Tdots Command; Cr_H-Pos Command - Sanyo PDG-DHT8000L - 8000 Lumens Specifications

PDG-DHT8000L Expand Serial Command Functional Specifications

9.5 PC Status Read Commands

9.5.1 CR_FSYNC Command

Command "CR_FSYNC" [CR]
Details Get value of Fine Sync
Acceptable
Response
%1
Unacceptable

9.5.2 CR_TDOTS Command

Command "CR_TDOTS" [CR]
Details Get value of Total Dots
Acceptable
%1
Response
Unacceptable

9.5.3 CR_H-POS Command

Command "CR_H-POS" [CR]
Details Get value of Horizontal Position
Acceptable
%1
Response
Unacceptable

9.5.4 CR_V-POS Command

Command "CR_V-POS" [CR]
Details Get value of Vertical Position
Acceptable
%1
Response
Unacceptable
"000_%1" [CR]
"0000" – "0031"
"Error Code" [CR] -------------- When command is invalid in the
given condition (such as being selected input)
"?" [CR] --------- When unknown command is received
"000_%1" [CR]
"mmmm" – "nnnn"
(mmmm = Display area H + Position H)
(nnnn = Maximum value less than 160 MHz of Dot Clock)
"Error Code" [CR] -------------- When command is invalid in the
given condition (such as being selected input)
"?" [CR] --------- When unknown command is received
"000_%1" [CR]
"0000" – " nnnn"
(nnnn = Total Dots - Display Area H)
"Error Code" [CR] -------------- When command is invalid in the
given condition (such as being selected input)
"?" [CR] --------- When unknown command is received
"000_%1" [CR]
"0000" – " nnnn"
(nnnn = Total Line - Display Area V)
"Error Code" [CR] -------------- When command is invalid in the
given condition (such as being selected input)
"?" [CR] --------- When unknown command is received
64/101