Cf_Fdefault Command; Cf_Rs232Mode Command; Cf_Standbymode Command; Cf_Ccaption Command - Sanyo PDG-DWL100 - WXGA DLP Projector Command Manual

PDG-DWL100 Expand Serial Command Functional Specifications

8.10.4 CF_FDEFAULT Command

Command "CF_FDEFAULT_%1" [CR]
%1 "RST"
Return the settings to Factory Default status (Valid only when in the normal
Details Power ON status)
No display is shown when projector received command..
Acceptable
Correspondence
Unacceptable

8.10.5 CF_RS232MODE Command

Command "CF_RS232MODE_%1" [CR]
"RS232" --------------------------- Set RS232
%1
"LAN" ------------------------------ Set LAN
Select RS232 mode. (Valid only when in the normal Power ON status.)
The status set by this command is stored in EEPROM and the setting
Details
remains effective after the power is turned to ALL OFF status.
No display is shown when projector received command..
Acceptable
Correspondence
Unacceptable

8.10.6 CF_STANDBYMODE Command

Command "CF_STANDBYMODE_%1" [CR]
"ON" --------------------------- Set Standby mode On
%1
"OFF" -------------------------- Set Standby mode Off
Select Eco Standby mode. (Valid only when in the normal Power ON status.)
The status set by this command is stored in EEPROM and the setting
Details
remains effective after the power is turned to ALL OFF status.
No display is shown when projector received command..
Acceptable
Correspondence
Unacceptable

8.10.7 CF_CCAPTION Command

Command "CF_CCAPTION_%1" [CR]
"OFF" ------------------------------ Set Off
%1 "CC1" ------------------------------ Set CC1
"CC2" ------------------------------ Set CC2
Select Closed caption. (Valid only when in the normal Power ON status.)
The status set by this command is stored in EEPROM and the setting
Details
remains effective after the power is turned to ALL OFF status.
No display is shown when projector received command..
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
26 / 47