Video Status Read Command; Cr_Sersys Command - Sanyo PDG-DWL100 - WXGA DLP Projector Command Manual

PDG-DWL100 Expand Serial Command Functional Specifications

9.6 Video Status Read Command

9.6.1

CR_SERSYS Command

Command "CR_SERSYS" [CR]
Get currently selected signal.
Details
Valid only when input is video. (Invalid when Slot is computer)
Acceptable
Correspondence
Unacceptable
"000_%1" [CR]
"1080i60"--------------- 1080i 60Hz
"1080i50" -------------- 1080i 50Hz
"1035i" ----------------- 1035i
"720P" ------------------ 720p
"575P" ------------------ 576p
%1 "480P" ------------------ 480p
"575i" -------------------- 576i
"480i" --------------------480i
"NO_SIGNAL" --------------- There is no signal
"?" [CR]
34 / 47
(includes composite signal such as PAL)
(includes composite signal such as NTSC)