Konica Minolta bizhub C35P User Manual page 248

This message...
PAPER JAM
FUSER/EXIT
I-UNIT END
REPLACE
X
I-UNIT MISSING
CHECK X
TONER OUT
REPLACE X
TONER MISSING
CHECK X
TRAY X EMPTY
"SIZE"
"MEDIA"
Status, Error, and Service Messages
means...
Media has misfed
leaving the fuser
area.
The enclosed toner
cartridges and imag-
ing units are not
installed.
The X Imaging unit
has completely
reached the end of its
life.
The X imaging unit is
not installed, or an
unapproved imaging
unit is installed.
The X toner cartridge
is completely empty.
The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed.
The X (Tray 1, 2 or 3)
was specified with the
printer driver for print-
ing, but Tray X is
empty. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to
OFF
do this...
Press the
play the help screen.
Follow the instructions in
the help screen to
remove misfed media.
Be sure to install the
enclosed toner car-
tridges and imaging
units.
Replace the Imaging
unit.
Install a correct KONICA
MINOLTA imaging unit.
Replace the toner car-
tridge.
Install a correct KONICA
MINOLTA toner car-
tridge.
Load the correct media
into the specified tray.
.
key to dis-
9-43