Konica Minolta bizhub C35P User Manual page 237

Symptom
The print or
color density
is uneven.
Irregular
print or mot-
tled image
appears.
There is
insufficient
fusing or the
image
comes off
when
rubbed.
9-32
Cause
One or more of the
toner cartridges may
be defective or low.
The printer is not
level.
The media is moist
from humidity.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
One or more of the
imaging units may be
defective.
The media is moist
from humidity.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Media type is set
incorrectly.
Solving Problems with Printing Quality
Solution
Remove the toner cartridges and
check them for damage. If one is dam-
aged, replace it.
Place the printer on a flat, hard, level
surface.
Adjust the humidity in the media stor-
age area.
Remove the moist media and replace it
with new, dry media.
Use KONICA MINOLTA-approved
media. See "Media Specifications" on
page 6-2.
Remove the imaging units and check it
for damage. If it is damaged, replace it.
Remove the moist media and replace it
with new, dry media.
Use KONICA MINOLTA-approved
media. See "Media Specifications" on
page 6-2.
When printing envelopes, labels, letter-
head, postcards, thick stock, glossy,
single side only paper or special paper,
specify the appropriate media type in
the printer driver.