Thick Stock - Konica Minolta bizhub C35P User Manual

–
Paper that has been printed on with a monochrome/color laser printer/
copier
–
Paper that has been printed on with a heat-transfer printer
–
Paper that has been printed on with any other printer or fax machine
Dusty
Wet (or damp)
Layered
Adhesive
Folded, creased, curled, embossed, warped, or wrinkled
Perforated, three-hole punched, or torn
Too slick, too coarse, or too textured
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m
ously with thick stock. However, this could affect the media feed, depending
on the media quality and printing environment. If problems occur, stop the
continuous printing and print one sheet at a time.
Capacity
Media Types
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
2
is referred to as thick stock. You can print continu-
Tray 1
(Manual Feed
Tray)
Tray 2
Tray 3
Up to 20 thick stock sheets, depending on
their thickness.
Not supported
6-5