Output Tray Extension; Alarm Lamp - Canon 4496B008AA Advanced Manual

Important
Do not touch the metal casing.
(7) Paper Output Tray
Printed paper is ejected. Open it fully before printing.

Output Tray Extension

(8)
Extend and open to support the printouts. Open it when printing.
(9) Inner Cover
Close it when printing on paper.
(10) ON button
Press to turn the power on or off.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
the POWER
lamp is not lit. If the power plug is disconnected from the wall outlet while the
POWER lamp is lit or flashing, the printer may become unable to print properly since the
Print Head is not protected.
Note
Auto power on/off feature
You can set the printer to turn on or off automatically.
- Auto Power On: Automatically turns on the printer when data is sent from the computer.
- Auto Power Off: Automatically turns off the printer when no data is sent for a certain
interval.
Specify this setting on the Maintenance sheet of the printer driver setup window.
For details on the settings, refer to the on-screen manual:
(11) POWER lamp
Lights green after flashing when the power is turned on.
(12) RESUME/CANCEL button
Press to cancel a print job in progress. You can press this button to release from printer error status and
resume printing, after the printer problem is resolved.

Alarm lamp

(13)
Lights or flashes orange when an error occurs, such as paper-out or ink-out.
Note
Advanced Guide .