Message Appears On The Computer Screen - Canon 4496B008AA Advanced Manual

Advanced Guide >
About Disc Label Printing
D009

Message Appears on the Computer Screen

Errors About Disc Label Printing Are Displayed
Check 1: If the Inner Cover is closed when starting disc label printing.
Open the Inner Cover, properly place the Disc Tray again, then press the
button.
Do not open or close the Inner Cover while printing is in progress. This may damage the
printer.
Check 2: Is the Disc Tray placed properly?
Open the Inner Cover, properly place the Disc Tray again, then press the
button.
Make sure that you are using the Disc Tray supplied with the printer ("G" is on the upper side).
For details on how to place the Disc Tray, see
Check 3: Is the printable disc placed on the Disc Tray?
Properly place the printable disc on the Disc Tray, attach the Disc Tray again, then press the
RESUME/CANCEL button.
Make sure that you are using the Disc Tray supplied with the printer ("G" is on the upper side).
For details on how to place the Disc Tray, see
Check 4: Unrecognizable printable disc may be placed.
Canon recommends that you use printable discs specially processed to be printed on by an
inkjet printer.
Check 5: Is the printable disc on the Disc Tray already printed?
If you place a printable disc on which has already been printed on the Disc Tray, the Disc Tray
may be ejected.
In this case, try printing again after clearing the Detects a printable disc in the disc tray check
box in Custom Settings on the Maintenance tab in the printer driver and clicking Send. When
printing is over, select the Detects a printable disc in the disc tray check box and click Send.
Note
If the Detects a printable disc in the disc tray check box is cleared, printing may start
without the printable disc loaded. Selecting the check box prevents the Disc Tray from
getting dirty.
> Troubleshooting > Message Appears on the Computer Screen
Attaching/Removing the Disc Tray
Attaching/Removing the Disc Tray
RESUME/CANCEL
RESUME/CANCEL
.
.
Page top