Error Message Appears On A Pictbridge Compliant Device - Canon 4496B008AA Advanced Manual

Advanced Guide >
Troubleshooting
U334

Error Message Appears on a PictBridge Compliant Device

The following are the possible errors that may occur when printing directly from a PictBridge compliant
device and the countermeasures to clear them.
Note
This section describes errors that are indicated on Canon-brand PictBridge compliant devices. The
error messages and operations may vary depending on the device you are using. For errors on non
-Canon PictBridge compliant devices, check the status of the
appropriate action to clear the error. For details, see
For the errors indicated on the PictBridge compliant device and their solution, also refer to the
instruction manual of the device. For other troubles on the device, contact the manufacturer.
Error Message on the PictBridge Compliant
Device
"Printer in use"
"No paper"
"Paper Error"
"Paper jam"
"Printer cover open"
"No print head"
"Waste tank full"/"Ink absorber full"
"No ink"/"Ink cassette error"
"Ink Error"
"Hardware Error"
> Error Message Appears on a PictBridge Compliant Device
Alarm Lamp Flashes Orange
If the printer is printing from the computer or
warming up, wait until the job ends.
When it is ready, the printer starts printing
automatically.
Load paper, and select Continue* in the display
on your PictBridge compliant device.
* To resume printing, you can also press the
RESUME/CANCEL
selecting Continue on the device.
If the Paper Output Tray is closed, open it. The
printer resumes printing. If the Inner Cover is
opened, close it and select Stop in the display on
your PictBridge compliant device to stop printing.
Select Stop in the display on your PictBridge
compliant device to stop printing.
Remove the jammed paper, load new paper,
press the
then try printing again.
Close the Top Cover on the printer.
The Print Head is defective or is not installed.
See Five flashes:
and take the appropriate action.
The ink absorber is nearly full.
See Eight flashes:
The ink tank is not installed properly or empty.
Check the number of how many the Alarm
flashes and take the appropriate action to resolve
the error.
Alarm Lamp Flashes Orange
An ink tank that was once empty is installed.
See Thirteen flashes:
Orange
Ink tank errors have occurred.
Replace the ink tank.
Alarm lamp and take the
.
Action
button on the printer instead of
RESUME/CANCEL button on the printer,
in Alarm Lamp Flashes Orange
in Alarm Lamp Flashes Orange
in Alarm Lamp Flashes
and take the appropriate action.
and take the appropriate action.
lamp