Alarm Lamp Flashes Orange - Canon 4496B008AA Advanced Manual

Advanced Guide >
Troubleshooting
U329

Alarm Lamp Flashes Orange

When a printer error occurs, the
indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct
the error.
(A) Note the number of flashes
(B) Flashes repeatedly
Number of flashes/Cause
Two flashes:
Printer is out of paper./Paper does not feed.
Three flashes:
Paper Output Tray is closed./Paper jams.
Four flashes:
Ink tank is not installed properly./Ink may have run
out.
Five flashes:
Print Head is not installed./Print Head is defective.
> Alarm Lamp Flashes Orange
Alarm lamp flashes orange as shown below. The number of flashes
Reload paper in the Rear Tray or Cassette and
press the
If the Paper Output Tray is closed, open it. The
printer resumes printing.
If opening the Paper Output Tray does not resolve
the problem, or if the tray was open to begin with,
the paper may be jammed. Remove the jammed
paper, reload paper properly in the printer, then
press the
Paper Jams
If the lamp on the ink tank is not lit, the ink tank
may not be installed properly.
Install an appropriate ink tank.
If the lamp on the ink tank is flashing, ink may
have run out.
Replacing the ink tank is recommended.
If printing is in progress and you want to continue
printing, press the printer's
button with the ink tank installed. Then printing can
continue. Replacing the ink tank is recommended
after the printing. The printer may be damaged if
printing is continued under the ink out condition.
Routine Maintenance
Note
If multiple ink lamps are flashing, refer to
Routine Maintenance
of each ink tank.
Follow the directions given in your setup manual
to install the Print Head.
If the Print Head is already installed, remove the
Print Head once and then reinstall it.
Action
RESUME/CANCEL button on the printer.
RESUME/CANCEL button on the printer.
RESUME/CANCEL
and confirm the status