Canon 3433B010 Basic Manual page 43

Error Message
The paper is too small.
Replace paper with A4/LTR
(vertical) or larger
The paper is too small.
Replace roll with 10 in. wide or
larger roll.
The paper is too small.
Remove paper and check pap.
size
Cause
The loaded paper is too small.
The loaded paper is too small.
A sheet has come out of the printer
during printing.
43
Corrective Action
Replace the paper with paper of A4/Letter (vertical)
size or larger as follows.
1. Press ▲ or ▼ to select Change Paper , press the
OK button, and remove the paper.
(→ , Removing Sheets)
2. Switch to paper A4/Letter (vertical) or larger.
(→"Loading and Printing on Sheets," User Manual)
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button.
Replace the roll with a roll 10 inches in width or larger
as follows.
1. Press ▲ or ▼ to select Change Paper , and then
press the OK button.
(→ , Removing the Roll from the Printer)
(→"Removing the Roll Holder from Rolls," User
Manual)
2. Replace the roll with a roll 10 inches wide or larger.
(→ , Attaching the Roll Holder to Rolls)
(→ , Loading Rolls in the Printer)
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button.
1. Press the Release Lever back and remove the
paper.
2. Reload the sheet, aligning it with the guide on the
right.
3. Pull the Release Lever forward.
4. If Not finished printing. Finish printing
remaining jobs? is displayed, press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→ , Loading Sheets in the Printer)
Error Messages