Canon 3433B010 Basic Manual page 41

Error Message
Maintenance cartridge problem.
Wrong maintenance cartridge.
Maint. cart. The level is low
No Maintenance Cartridge
capacity.
Insert the maintenance
cartridge.
Paper cutting failed.
Cause
An incompatible or used
Maintenance Cartridge has been
installed.
A Maintenance Cartridge for
a different model of printer is
installed.
The Maintenance Cartridge is
almost full.
The Maintenance Cartridge cannot
absorb enough ink for Printhead
cleaning or other operation.
The Maintenance Cartridge is not
installed.
There are sheets left on the
Ejection Guide .
There is a foreign object by the
Output Tray , obstructing the
Cutter Unit .
You are not using the printer under
the recommended environmental
conditions for the paper.
You are using paper that is not
compatible with automatic cutting.
In other cases, the Cutter Unit
may be damaged.
Corrective Action
Install an unused Maintenance Cartridge specified for
use with the printer.
(→ , Replacing the Maintenance Cartridge)
Replace it with the Maintenance Cartridge for your
particular model.
You can continue to print, but prepare a new
Maintenance Cartridge to use when the message for
replacement is displayed.
After confirming that the printer has stopped
operating, replace the Maintenance Cartridge .
(→ , Replacing the Maintenance Cartridge)
Install the Maintenance Cartridge .
(→ , Replacing the Maintenance Cartridge)
1. Push the Release Lever back and remove the
paper.
2. Load the paper.
3. Pull the Release Lever forward.
4.
If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
(→ , Loading Rolls in the Printer)
1. Lift the Top Cover and remove the foreign object.
2. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see the Paper Reference Guide .
(→"Types of Paper," User Manual)
1. Specify Manual as the cutting method and use
scissors or a cutting tool to cut the roll.
(→"Specifying the Cutting Method for Rolls," User
Manual)
For information about paper that is compatible with
automatic cutting, see the Paper Reference Guide .
(→"Types of Paper," User Manual)
2. Push the Release Lever back and remove the
paper.
Contact your Canon dealer for assistance.
41
Error Messages