Canon 3433B010 Basic Manual page 17

Phenomenon
Messages advising to check the
maintenance cartridge are not
cleared
The printer consumes a lot of ink
The printer takes time to start up
Cause
The printer has not detected the
new Maintenance Cartridge that
was used to replace the old one.
Many full-page color images are
printed.
Head Cleaning B in the Control
Panel menu is executed
frequently.
You have just finished initial
installation, when more ink is
consumed to fill the system.
The printhead nozzles are
clogged.
The printer may have shut down
incorrectly last time. This may
happen after power outages or if
the printer is unplugged before it is
turned off.
In this case, the next time power
is restored, the printer's hard disk
is checked, and startup may take
some time.
Corrective Action
Remove the new Maintenance Cartridge you have just
installed and insert it again firmly.
Restart the printer.
In print jobs such as photos, images are filled with
color. This consumes a lot of ink. This does not
indicate a problem with the printer.
Head Cleaning B in the Control Panel menu
consumes a lot of ink. This does not indicate a
problem with the printer. Unless the printer has
been moved or stored for a long period or you are
troubleshooting Printhead problems, we recommend
not performing Head Cleaning B , to the extent
possible.
After initial installation or at the first-time use after
transfer, ink flows into the system between the Ink
Tank and Printhead , which may cause the ink level
indicators to drop to 80%. This does not indicate a
problem with the printer.
Check for nozzle clogging.
(→"Checking for Nozzle Clogging," User Manual)
Please wait a while, because it may take several
minutes to finish checking the hard disk.
If an error message is displayed after the hard disk
check, follow the instructions indicated to resolve the
problem.
17
Troubleshooting