System Settings - D-Link DIR-632 User Manual

Section 3 - Configuration
Save Settings to Use this option to save the current router configuration
Local Hard Drive: settings to a file on the hard disk of the computer you are
using. First, click the Save button. You will then see a file
dialog, where you can select a location and file name for
the settings.
Load Settings
Use this option to load previously saved router configuration
from Local Hard
settings. First, use the Browse control to find a previously save
Drive:
file of configuration settings. Then, click the Load button to
transfer those settings to the router.
Restore to Factory
This option will restore all configuration settings back to
Default Settings:
the settings that were in effect at the time the router was
shipped from the factory. Any settings that have not been
saved will be lost, including any rules that you have created.
If you want to save the current router configuration settings,
use the Save button above.
Reboot Device:
Click to reboot the router.
D-Link DIR-632 User Manual

System Settings

63