Manual Configuration; Dynamic (Cable) - D-Link DIR-632 User Manual

Section 3 - Configuration
My Internet Select Dynamic.IP.(DHCP) to obtain IP Address information
Connection:
automatically from your ISP. Select this option if your ISP does
not give you any IP numbers to use. This option is commonly
used for Cable modem services.
Check Enable.Advanced.DNS.Service if you wish to use
Advanced DNS
Service: this free security option.
Host Name:
The Host Name is optional but may be required by some
ISPs.
Check the box if you are having problems obtaining an IP
Use Unicasting:
address from your ISP.
DNS Addresses: Enter the Primary DNS server IP address assigned by your
ISP.
Maximum Transmission Unit - you may need to change the
MTU:
MTU for optimal performance with your specific ISP. 1500 is
the default MTU.
MAC Address:
The default MAC Address is set to the Internet port's physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP. You can use the Clone.Your.PC's.
MAC. Address button to replace the Internet port's MAC
address with the MAC address of your Ethernet card.
D-Link DIR-632 User Manual

Manual Configuration

Dynamic (Cable)

18