System Settings - D-Link SharePort Go DIR-506L User Manual

Section 3 - Configuration
This page allows you to save and restore your configuration, and reset the DIR-506L to the factory default settings.
Save Settings Clicking the Save button will allow you to save the current
To Local Hard repeater configuration settings to a file on the hard disk
Drive: of the computer you are using. You will then see a file
dialog where you can select a location and file name for
the settings.
Load Settings Use this option to load previously saved configuration
settings. Click Browse to find a previously saved
From Local Hard
Drive: configuration file. Then, click the Upload Settings button
to transfer those settings to the DIR-506L.
Restore to This option will restore all configuration settings back to
Factory Default the factory default settings. Any settings that have not
Settings: been saved will be lost, including any rules that you have
created. If you want to save your current configuration
settings, use the Save button above.
Note: Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Configured.
D-Link DIR-506L User Manual

System Settings

60