Indicates the channel setting for the DIR-632. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless

network or to customize the wireless network. If you enable Auto.Channel.Scan, this option will be greyed out.

Transmission Rate:

Select the transmit rate. It is strongly suggested to select Best.(Auto) for best performance.

Channel Width:

Select the Channel Width:

Auto.20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.

20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.

Visibility Status:

Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-632. If Invisible is selected, the SSID of the DIR-632 will

not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-632 in order to connect to it.

Wireless Security:

Refer to page 76 for more information regarding wireless security.

D-Link DIR-632 User Manual

Table of Contents