Connect.to.a.wireless.network; Using Windows Vista - D-Link DIR-632 User Manual

Section 4 - Security
Connect to a Wireless Network

Using Windows Vista

®
Windows Vista users may use the built-in wireless utility. If you are using another company's utility or Windows 2000, please refer to the user manual
of your wireless adapter for help with connecting to a wireless network. Most utilities will have a "site survey" option similar to the Windows Vista
utility as seen below.
If you receive the Wireless.Networks.Detected bubble, click on the center of
the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right corner
next to the time). Select Connect.to.a.network.
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check you TCP/IP settings
for your wireless adapter. Refer to the Networking.Basics section in this manual
for more information.
D-Link DIR-632 User Manual 86