Using Windows - D-Link DIR-632 User Manual

Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network

Using Windows

XP
®
Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are
using another company's utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless
network. Most utilities will have a "site survey" option similar to the Windows XP utility as seen below.
If you receive the Wireless.Networks.Detected bubble, click on the center
of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select View.Available.Wireless.Networks.
The utility will display any available wireless networks in your area. Click on
a network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check you TCP/IP
settings for your wireless adapter. Refer to the Networking.Basics section
in this manual for more information.
D-Link DIR-632 User Manual 90