Manual Configuration; Dynamic (Cable) - D-Link DIR-685 Xtreme N User Manual

Secton  - Configuraton
My Internet Select Dynamic.IP.(DHCP) to obtain IP Address
Connection:
information automatically from your ISP. Select
this option if your ISP does not give you any IP
numbers to use. This option is commonly used
for Cable modem services.
Host Name:
The Host Name is optional but may be required
by some ISPs.
DNS Addresses:
Enter the Primary DNS server IP address
assigned by your ISP.
MTU:
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your specific ISP. The default MTU is 1500.
MAC Address:
The default MAC Address is set to the Internet
port's physical interface MAC address on the
Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can
use the Clone.Your.PC's.MAC.Address button to replace the Internet port's MAC address with the MAC address of your
Ethernet card.
D-Lnk DIR-685 User Manual

Manual Configuration

Dynamic (Cable)

0