Western Digital WDBLGT0040KBK Administrator's Manual page 60

7. The recovery application on the DVD prepares the USB drive. This process can
take up to 15 minutes to complete. After the USB drive preparation is done,
additional instructions appear to guide you through the recovery process:
a. Shut down the WD Sentinel server.
b. Insert the USB flash drive into one of the server's USB ports.
c. Restart your server while pressing and holding the Recovery button on the back of
the server.
d. Continue to hold the Recovery button until the LCD displays "INITIALIZING OK.
LOADING RECOVERY." Release the Recovery button.
e. Wait until the LCD displays "RECOVERY STARTED."
8. Return to the PC and follow the instructions by clicking Next. Make sure the PC
is on the same network as the WD Sentinel server. The application searches for
the WD Sentinel server and performs the final recovery. When the recovery is
done, the default display (WDSentinel and IP address) appears on the LCD. For
more information, see
WD SENTINEL DX4000
ADMINISTRATOR'S GUIDE
Microsoft Online Help.
USING THE WD SENTINEL SERVER'S FEATURES
56