Western Digital WDBLGT0040KBK Administrator's Manual page 55

3. Insert the USB flash drive into the Windows PC USB port. The USB flash drive
should appear in the Select USB flash drive drop-down list.
4. If the USB flash drive is not on the list, click Refresh and search for it.
5. After locating the USB flash drive, click the "I understand..." check box to
indicate that you know the process will delete all files and folders on your USB
flash drive.
6. Click Next to display the "Congratulations and Next Steps" page.
7. Follow the steps listed on this page:
a. Shut down the WD Sentinel server.
b. Insert the USB flash drive into one of the server's USB ports.
c. Restart your server while pressing and holding the Recovery button on the back of
the server.
d. Continue to hold the Recovery button until the LCD displays "INITIALIZING OK.
LOADING RECOVERY." Release the Recovery button.
e. Allow the recovery process to complete. When it is done, the LCD displays
"UNLOCK DRIVES SUCCESS."
WD SENTINEL DX4000
ADMINISTRATOR'S GUIDE
USING THE WD SENTINEL SERVER'S FEATURES
51