Updating Software - Western Digital WDBLGT0040KBK Administrator's Manual

Lock/Unlock
For security reasons, you can lock or unlock the drives. You cannot lock or unlock an
individual drive; you either lock them all or unlock them all, using a password you
create here. This password may be but does not have to be the same as the
WD Sentinel server Administrator password.
Important: Store your password in a secure place. If the password is lost, there is no
way to get it back or unlock the drives, and all of its data may be lost.
To lock the drives:
1. Click Lock drives.
2. Set and confirm the password and enter a hint to remind you of the password.
Click Next.
To unlock drives:
1. Click Unlock drives.
2. Enter the current password, and click Unlock drives.
To change the password:
1. Click Unlock drives.
2. Enter the current password.
3. Set and confirm a new password and enter a hint to remind you of the
password. Click OK.

Updating Software

Periodically, WD issues software updates for your WD Sentinel DX4000 server. The
Update Software tab within Monitor allows you to update WD Sentinel DX4000
software automatically or manually. Please note that this tab only allows you to apply
software updates issued by WD. To manage or apply Microsoft software updates,
go to Server Settings on the Dashboard.
Manual Updates of WD Software
To check for software updates and update the software:
WD SENTINEL DX4000
ADMINISTRATOR'S GUIDE
MANAGING THE WD SENTINEL SERVER (DASHBOARD)
25