Western Digital WDBLGT0040KBK Administrator's Manual page 51

To restore a Windows PC that has been backed up:
1. Click Computers and Backups
2. Select the computer that was backed up.
3. Insert a USB flash device into one of the WD Sentinel server's USB ports.
4. In the panel on the right, click Additional Client Computer Backup Tasks and
then Tools:
5. Click
Create Key
connected USB flash drive. You will use the key to boot the PC and download
the backed-up system. Follow the wizard to complete the process.
6. Remove the USB flash drive from the WD Sentinel server and connect it to the
computer you want to restore.
7. Boot the Windows PC from the USB flash drive:
a. Start the computer.
b. Depending on your computer, press F12 or another key that displays boot options.
c. From the Boot menu, select USB Device.
d. On Windows Boot Manager, select a Windows operating system for a full-system
restore. The Full System Restore wizard welcome screen displays.
e. If a message indicates that you do not have the correct network card driver, insert
the USB flash drive with the driver into another USB port on the Windows PC, and
follow the steps in the wizard to restore the computer.
f. If you do have the correct driver, click Continue and complete the steps in the
wizard to restore the computer.
Note: Refer to Microsoft Online Help
WD SENTINEL DX4000
ADMINISTRATOR'S GUIDE
on the navigation bar.
to generate a bootable USB flash key (configuration file) on the
for additional information.
USING THE WD SENTINEL SERVER'S FEATURES
47