Firmware Upgrade; Ping - TP-Link TL-SG2216 Cli Reference Manual

Syntax
user-config save
Command Mode
Privileged EXEC Mode
Example
Save current settings:
TP-LINK# user-config save

firmware upgrade

Description
The firmware upgrade command is used to upgrade the switch system via the
TFTP server.
Syntax
firmware upgrade filename name ip-address ip-addr
Parameter
name —— Specify the name for the Firmware File.
ip-addr —— IP Address of the TFTP server.
Command Mode
Privileged EXEC Mode
Example
Upgrade the switch system via the TFTP server with the IP 192.168.0.148:
TP-LINK# firmware upgrade filename firmware.bin ip-address 192.168.0.148

ping

Description
The ping command is used to test the connectivity between the switch and one
node of the network.
Syntax
ping {ip_addr} [-n count] [-l count] [-i count]
Parameter
ip_addr —— The IP address of the destination node for ping test.
47