Reset; Reboot; User-Config Backup - TP-Link TL-SG2216 Cli Reference Manual
Gigabit smart switch
Hide thumbs
Also See for TL-SG2216:
- Reference manual (226 pages) ,
- User manual (132 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
reset
Description
The reset command is used to reset the switch's software. After resetting, all
configuration of the switch will restore to the factory defaults and your current
settings will be lost.
Syntax
reset
Command Mode
Privileged EXEC Mode
Example
Reset the software of the Switch:
TP-LINK# reset
reboot
Description
The reboot command is used to reboot the Switch. To avoid damage, please
don't turn off the device while rebooting.
Syntax
reboot
Command Mode
Privileged EXEC Mode
Example
Reboot the Switch:
TP-LINK# reboot
user-config backup
Description
The user-config backup command is used to backup the configuration file by
TFTP server.
Syntax
user-config backup filename name ip-address ip-addr
45
Advertisement
Table of Contents
