show interface configuration
Description
The show interface configuration command is used to display the
configurations of an Ethernet port or all Ethernet ports, including Port-status,
Flow Control, Negotiation Mode and Port-description.
Syntax
show interface configuration ethernet [port]
Parameter
port —— The port number selected to display the configurations. By default,
the configuration information of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the configurations of port 5:
TP-LINK# show interface configuration ethernet 5
show interface status
Description
The show interface status command is used to display the connective-status
of an Ethernet port or all Ethernet ports.
Syntax
show interface status ethernet [port]
Parameter
port —— The port number selected to display the connective-status. By default,
the connective-status of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the connective-status of all Ethernet ports:
TP-LINK(config)# show interface status ethernet
59