Ip Address; Ip Management-Vlan - TP-Link TL-SG2216 Cli Reference Manual

Example
Configure the daylight saving time from 2:00am, the first Sunday of May to
2:00am, the last Sunday of Oct and the offset is 45 minutes:
TP-LINK(config)# system-time dst recurring first Sun May 02:00 last Sun Oct
02:00 45

ip address

Description
The ip address command is used to configure the IP Address, Subnet Mask
and Default Gateway. To restore to the factory defaults, please use no ip
address command.
Syntax
ip address {ip-addr} {ip-mask} [gateway]
no ip address
Parameter
ip-addr — — The system IP of the Switch. The default system IP is
192.168.0.1.
ip-mask —— The Subnet Mask of the Switch. The default Subnet Mask is
255.255.255.0.
gateway —— The Default Gateway of the Switch. By default, it is empty.
Command Mode
Global Configuration Mode
Example
Configure the system IP as 192.168.0.69 and the Subnet Mask as
255.255.255.0:
TP-LINK(config)# ip address 192.168.0.69 255.255.255.0

ip management-vlan

Description
The ip management-vlan command is used to configure the IP management
VLAN, through which you can log on to the switch.
Syntax
ip management-vlan vlan-id
43