Firmware Upgrade; System Reboot - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
Note:
1.
It will take a few minutes to backup the configuration. Please wait without any operation.
2.
Check the checkbox to copy running-config to startup-config before exporting the
startup-config.
4.3.4 Firmware Upgrade
The switch system can be upgraded via the Web management page. To upgrade the system is
to get more functions and better performance. Go to
updated firmware.
Choose the menu System → System Tools → Firmware Upgrade to load the following page.
Note:
1.
Don't interrupt the upgrade.
2.
Upgrading the firmware will only upgrade the backup image.
3.
You are suggested to backup the configuration before upgrading.
4.
Please select the proper software version matching with your hardware to upgrade.
5.
To avoid damage, please don't turn off the device while upgrading.
6.
After upgrading, the device will reboot automatically.
4.3.5 System Reboot
On this page you can reboot the specified unit switch in the stack and return to the login page.
Please save the current configuration before rebooting to avoid losing the configuration
unsaved
Choose the menu System → System Tools → System Reboot to load the following page.
Figure 4-15 Firmware Upgrade
29
http://www.tp-link.com
to download the
Advertisement
Table of Contents
