Chapter 8
System Commands can be used to configure the System information and System IP, reboot and
reset the switch, upgrade the switch system and other operations.
system-descript
Description
The system-descript command is used to configure the Device Name, Device
Location and System Contact. To clear all the information, please use no
system-descript command.
Syntax
system-descript { sysname sysname | location location | contact-info
contact-info }
no system-descript {sysname | location | contact-info}
Parameter
sysname —— System Name(Device Name). The length of the name ranges
from 1 to 32 characters. By default, it is empty.
location —— Device Location. It consists of 32 characters at most. By default,
it is empty.
contact-info —— Contact Information. It consists of 32 characters at most. By
default, it is empty.
Command Mode
Global Configuration Mode
Example
Configure the System Contact as www.tp-link.com.cn:
TP-LINK(config)# system-descript contact-info www.tp-link.com.cn
system-time manual
Description
The system-time manual command is used to configure the system time
manually.
Syntax
system-time manual time
System Commands
39