Show Interface Counters; Show Storm-Control Ethernet - TP-Link TL-SG2216 Cli Reference Manual
Gigabit smart switch
Hide thumbs
Also See for TL-SG2216:
- Reference manual (226 pages) ,
- User manual (132 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
show interface counters
Description
The show interface counters command is used to display the statistic
information of an Ethernet port or all Ethernet ports.
Syntax
show interface counters ethernet [port]
Parameter
port ——The port number selected to display the statistic information. By
default, the statistic information of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the statistic information of Ethernet port 3:
TP-LINK(config)# show interface counters ethernet 3
show storm-control ethernet
Description
The show storm-control ethernet command is used to display the
storm-control information of an Ethernet port or all Ethernet ports.
Syntax
show storm-control ethernet [port]
Parameter
port —— The port number selected to display the storm-control information. By
default, the storm-control information of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the storm-control information of all Ethernet ports:
TP-LINK(config)# show storm-control ethernet
60
Advertisement
Table of Contents
