TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# storm-control disable mc-rate
storm-control disable ul-rate
Description
The storm-control disable ul-rate command is used to disable the UL-Frame
control.
Syntax
storm-control disable ul-rate
Command Mode
Interface Configuration Mode(interface ethernet / interface range ethernet)
Example
Disable the UL-Frame control for port 5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# storm-control disable ul-rate
port rate-limit
Description
The port rate-limit command is used to configure the Rate Limit for an Ethernet
port. To disable the Rate Limit, please use no port rate-limit command.
Syntax
port rate-limit [ ingress ingress-rate ] [ egress egress-rate ]
no port rate-limit
Parameter
ingress-rate —— Configure the bandwidth for receiving packets on the port,
and the system will automatically select integral multiple of 64Kbps that closest
to the rate you entered as the real Ingress rate.
egress-rate —— Configure the bandwidth for sending packets on the port, and
the system will automatically select integral multiple of 64Kbps that closest to
the rate you entered as the real Egress rate.
Command Mode
Interface Configuration Mode(interface ethernet / interface range ethernet)
57