Firmware Upgrade; System Reboot - TP-Link T2500-28TC User Manual

The following entries are displayed on this screen:
Config Backup

Backup Config:
Note:
It will take a few minutes to back up the configuration. Please wait without any operation.

4.3.3 Firmware Upgrade

The switch system can be upgraded via the Web management page. To upgrade the system is to
get more functions and better performance. Go to
firmware.
Choose the menu System→System Tools→Firmware Upgrade to load the following page.
Note:
1. Don't interrupt the upgrade.
2. Please select the proper software version matching with your hardware to upgrade.
3. To avoid damage, please don't turn off the device while upgrading.
4. After upgrading, the device will reboot automatically.
5. You are suggested to back up the configuration before upgrading.

4.3.4 System Reboot

On this page you can reboot the switch and return to the login page. Please save the current
configuration before rebooting to avoid losing the configuration unsaved
Choose the menu System→System Tools→System Reboot to load the following page.
Click the Backup Config button to save the current configuration
as a file to your computer. You are suggested to take this
measure before upgrading.
http://www.tp-link.com
Figure 4-15 Firmware Upgrade
Figure 4-16 System Reboot
28
to download the updated