Default Settings - Kyocera KM-1530 Instruction Handbook Manual

2. Default settings

The state the copier is in at the end of warm-up or when the Reset key is pressed is called the initial mode, and the function settings that are
automatically set for the initial mode are called the default settings. The default settings can be changed according to how you wish to use the
copier.
(1) Default settings
Setting codes are provided for the default setting items that have selection items. Only the number of the setting code appears on the copy uantity
display. See the "Setting code" column in the table below for the meanings of those numbers. Initial settings are indicated with an asterisk (
Default code Setting item
F01 User status report
F02 Exposure mode
F03
Exposure steps
F04 Auto exposure adjustment
Text and photo original exposure
F05
adjustment
Setting contents
Prints the details of the default settings.
Selects the image mode at power-on.
Changes the number of exposure steps for the manual
exposure mode.
Adjusts the overall exposure when using the auto exposure
mode. The larger the setting code number, the darker the
copy density.
Adjusts the exposure for when text and photo original is
selected for the image mode. The larger the setting code
number, the darker the copy density.
CHAPTER 6 COPIER MANAGEMENT
1: Auto Exposure
2: Text & Photo
3: Photo
4: Text
1: 5 steps
2: 9 steps
1: 1 Light
2: 2
3: 3
4: 4
*
5: 5
6: 6
7: 7 Dark
1: 1 Light
2: 2
3: 3
4: 4
*
5: 5
6: 6
7: 7 Dark
).
*
Setting code
*
*
6-4