Displaying The Mst Configuration And Status - Cisco ME 3400G-2CS - Ethernet Access Switch Software Configuration Manual

Chapter 15 Configuring MSTP
To restart the protocol migration process on a specific interface, use the clear spanning-tree
detected-protocols interface interface-id privileged EXEC command.

Displaying the MST Configuration and Status

To display the spanning-tree status, use one or more of the privileged EXEC commands in
Table 15-4 Commands for Displaying MST Status
Command
show spanning-tree mst configuration
show spanning-tree mst instance-id
show spanning-tree mst interface interface-id Displays MST information for the specified interface.
For information about other keywords for the show spanning-tree privileged EXEC command, see the
command reference for this release.
78-17058-01
Purpose
Displays the MST region configuration.
Displays MST information for the specified instance.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Displaying the MST Configuration and Status
Table 15-4:
15-23