Cisco ME 3400G-2CS - Ethernet Access Switch Software Configuration Manual page 539

Understanding QoS
Figure 30-1
Basic QoS includes these actions.
Packet classification allows you to organize traffic on the basis of whether or not the traffic matches
•
a specific criteria. When a packet is received, the switch identifies all key packet fields: class of
service (CoS), Differentiated Services Code Point (DSCP), or IP precedence. The switch classifies
the packet based on this content or based on an access-control list lookup. For more information, see
the
• Packet policing determines whether a packet is in or out of profile by comparing the rate of the
incoming traffic to the configured policer. You can control the traffic flow for packets that conform
to or exceed the configured policer. For more information, see the
• Packet prioritization or marking evaluates the classification and policer information to determine the
action to take. All packets that belong to a classification can be remarked. When you configure a
policer, packets that meet or exceed the permitted bandwidth requirements (bits per second) can be
conditionally passed through, dropped, or reclassified. For more information, see the
section on page
Congestion management uses queuing and scheduling algorithms to queue and sort traffic leaving a
•
port. The switch supports these scheduling and traffic-limiting features: class-based weighted fair
queuing (CBWFQ), class-based traffic shaping, port shaping, and class-based priority queuing. You
can provide guaranteed bandwidth to a particular class of traffic while still servicing other traffic
queues. For more information, see the
page
• Queuing on the switch is enhanced with the weighted tail-drop (WTD) algorithm, a
congestion-avoidance mechanism. WTD differentiated traffic classes and regulates the queue size
(in number of packets) based on the classification. For more information, see the
Avoidance and Queuing" section on page
This section includes information about these topics:
Modular QoS CLI, page 30-3
•
• Input and Output Policies, page 30-4
• Classification, page 30-5
• Table Maps, page 30-11
• Policing, page 30-12
Marking, page 30-16
•
Congestion Management and Scheduling, page 30-18
•
Congestion Avoidance and Queuing, page 30-24
•
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
30-2
Modular QoS CLI Model
Classification Policing
Policer
Drops
"Classification" section on page
30-16.
30-18.
Marking
Congestion
30-5.
"Congestion Management and Scheduling" section on
30-24.
Chapter 30 Configuring QoS
Congestion Queuing
Avoidance
Scheduling
Drops
"Policing" section on page
"Marking"
"Congestion
78-17058-01
30-12.