Configuring Hsrp; Default Hsrp Configuration - Cisco ME 3400G-2CS - Ethernet Access Switch Software Configuration Manual

Configuring HSRP

Figure 33-2
Active router for group 1
Standby router for group 2
Configuring HSRP
These sections contain this configuration information:
•
•
•
•
•
•
•

Default HSRP Configuration

Table 33-1
Table 33-1
Feature
HSRP groups
Standby group number
Standby MAC address
Standby priority
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
33-4
MHSRP Load Sharing
Router A
10.0.0.1
Client 1 Client 2
Default HSRP Configuration, page 33-4
HSRP Configuration Guidelines, page 33-5
Enabling HSRP, page 33-5
Configuring HSRP Priority, page 33-6
Configuring MHSRP, page 33-9
Configuring HSRP Authentication and Timers, page 33-9
Enabling HSRP Support for ICMP Redirect Messages, page 33-11
shows the default HSRP configuration.
Default HSRP Configuration
Active router for group 2
Standby router for group 1
Router B
10.0.0.2
Client 3
Default Setting
None configured
0
System assigned as: 0000.0c07.acXX, where XX is the HSRP
group number
100
Chapter 33 Configuring HSRP
Client 4
78-17058-01