Displaying The Mst Configuration And Status - Cisco Catalyst 2928 Software Configuration Manual

Displaying the MST Configuration and Status

Displaying the MST Configuration and Status
To display the spanning-tree status, use one or more of the privileged EXEC commands in
Table 17-5 Commands for Displaying MST Status
Command
show spanning-tree mst configuration
show spanning-tree mst configuration digest Displays the MD5 digest included in the current MSTCI.
show spanning-tree mst instance-id
show spanning-tree mst interface interface-id Displays MST information for the specified interface.
For information about other keywords for the show spanning-tree privileged EXEC command, see the
command reference for this release.
Catalyst 2928 Switch Software Configuration Guide
17-26
Purpose
Displays the MST region configuration.
Displays MST information for the specified instance.
Chapter 17 Configuring MSTP
Table 17-5:
OL-23389-01