Table of Contents
Advertisement
Section 5.2.2, "Deciding Whether to Cluster-Enable the WebAccess Agent Volume," on
page 90
Section 5.2.3, "Determining an Appropriate Failover Path for the WebAccess Agent Volume,"
on page 91
Section 5.2.4, "Planning a Secondary IP Address and Cluster-Unique Port Numbers for the
WebAccess Agent and Its MTA," on page 91
Section 5.2.5, "Deciding Where to Install the WebAccess Agent and Its MTA," on page 91
Section 5.2.6, "Deciding Whether to Run the WebAccess Agent and Its MTA in Protected
Memory," on page 92
Section 5.2.7, "Planning the MTA Installation," on page 92
Section 5.2.8, "Planning the WebAccess Installation," on page 92
5.2.1 Planning a New Domain for the WebAccess Agent
The considerations involved in planning a domain for the WebAccess Agent are much the same as
planning any other domain. In preparation, review
the
"Domain
Keep in mind the following cluster-specific details:
When you specify the location for the domain directory on the Domain Worksheet, include the
shared volume where you want the domain directory to reside.
Do not concern yourself with the GroupWise agent information on the Domain Worksheet. You
can stop with
When you have completed the Domain Worksheet, transfer the key information from the Domain
Worksheet to the WebAccess Clustering Worksheet.
WEBACCESS CLUSTERING WORKSHEET
Under
Item 1: Shared Volume for WebAccess
Worksheet to the WebAccess Clustering Worksheet.
Under
Item 2: WebAccess Agent Domain
from the Domain Worksheet to the WebAccess Clustering Worksheet.
5.2.2 Deciding Whether to Cluster-Enable the WebAccess
Agent Volume
You should plan to cluster-enable the shared volume where the WebAccess Agent domain will
reside. For a review of the benefits of cluster-enabling volumes, see
to Cluster-Enable the Shared Volumes Used by GroupWise," on page
in the context of planning MTA and POA installations.
WEBACCESS CLUSTERING WORKSHEET
Under
Item 1: Shared Volume for WebAccess
90
GroupWise 7 Interoperability Guide
Worksheet" in "Domains" in the
item
10. You will plan the MTA installation later.
"Planning a New
GroupWise 7 Administration
Agent, transfer the domain location from the Domain
Name, transfer the domain name and database directory
Agent, mark Yes under Cluster Enabled?.
Domain", then print and fill out
Guide.
Section 2.6, "Deciding Whether
27, which describes the issues
Advertisement
Table of Contents
