Configuring Search-And-Replace Values For An Individual Cluster Resource - Novell BUSINESS CONTINUITY CLUSTERING 1.2 - ADMINISTRATION Administration Manual

6 Select the Business Continuity tab.
7 Enable a cluster resource or cluster pool resource for business continuity by selecting the
Enable Business Continuity Features check box.
8 If you have not created a cluster replacement script to specify search-and-replace values for the
entire cluster, do one of the following:
Cluster Replacement Script: (Recommended) Create a replacement script that contains
search-and-replace values to use for the entire cluster by following the procedure in
Section 9.3, "Adding Search-and-Replace Values to the Resource Replacement Script," on
page 84, then continue with
Resource," on page
Individual Resource Replacement Script: (Not recommended) Create a replacement
script that contains search-and-replace values only for an individual resource. Continue
with Section 11.3, "Configuring Search-and-Replace Values for an Individual Cluster
Resource," on page
9 Continue with Section 11.4, "Assigning Preferred Peer Clusters for the Resource," on
page 102.
11.3 Configuring Search-and-Replace Values for
an Individual Cluster Resource
Some values for a cluster resource's properties (such as IP addresses) are specified in the resource
load and unload scripts when you create the resource. Whenever a resource fails over to a different
peer cluster, these properties must be changed to values that work in the destination peer cluster.
BCC provides a Search-and-Replace option that dynamically modifies the load and unload scripts
for the resource so that it has the values it needs when it is migrated to or fails over between peer
clusters.
You can create a replacement script that contains search-and-replace values for the entire cluster, or
for an individual resource. Replacement scripts are for inbound changes to scripts for objects being
synchronized from other clusters, not outbound.
IMPORTANT: We recommend that you create replacement script for the entire cluster instead of
for an individual resource. For information, see
the Resource Replacement Script," on page
Before you create a replacement script for an individual resource, you should contact Novell
Support.
The search-and-replace data that you add is resource-specific, and it is not synchronized via Identity
Manager between the clusters in the business continuity cluster.
To create a replacement for an individual cluster resource:
1 In the Resource Script Replacements section of the Business Continuity page, click New.
If a resource has already been configured for business continuity, you can click Edit to change
existing search-and-replace values, or you can click Delete to delete them.
2 Add the desired search-and-replace values, then click OK.
Section 11.4, "Assigning Preferred Peer Clusters for the
102.
101.
Section 9.3, "Adding Search-and-Replace Values to
84.
Configuring BCC for Cluster Resources 101