Standard Cmos Setup - JETWAY J-530BF User Manual

3-1 STANDARD CMOS SETUP

Choose "STANDARD CMOS SETUP" in the CMOS SETUP UTILITY Menu (Figure 3-1).
The STANDARD CMOS SETUP allows user to configure system setting such as current
date and time, type of hard disk drive installed in the system, floppy drive type, and the
type of display monitor. Memory size is auto-detected by the BIOS and displayed for your
reference. When a field is highlighted (direction keys to move cursor and <Enter> key to
select), the entries in the field will be changed by pressing <PgDn> or <PgUp> keys or
user can enter new data directly from the keyboard.
Date (mm:dd:yy) : Thu, Mar, 12 1998
Time (hh:mm:ss) : 13 : 43 : 56
HARD DISKS
Primary Master
Primary Slave
Secondary Master : Auto
Secondary Slave : Auto
Drive A : 1.44M , 3.5 in.
Drive B : None
Video : EGA/VGA
Halt On : All Errors
Esc : Quit
F1 : Help
NOTE: If hard disk Primary Master/Slave and Secondary Master/Slave were used Auto, than
the hard disk size and model will be auto-detect on display during POST.
NOTE: The "Halt On:" field is to determine when to halt the system by the BIOS is error
occurred during POST.
ROM PCI/ISA BIOS (2A5IMJ1B)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
: Auto 0 0
: Auto 0 0
0 0
0 0
↑↓→← : Select Item
(Shift)F2: Change Color
Figure 3-2
17
0 0 0
0 0 0
0 0 0
0 0 0
Base Memory :
Extended Memory : 7168K
Other Memory :
Total Memory : 8192K
Pu/Pd/+/- : Modify
0 Auto
0 Auto
0 Auto
0 Auto
640K
384K