Using Auto-Connect
Select Edit > Auto-Connect (or click the toolbar button) to enable the Auto-Connect feature.
When Auto-Connect is enabled, any time you drag-and-drop a device onto the system diagram, VA
automatically draws a connection between the device and an available port on the Central Controller (or
intermediate device required for the device to connect to the Controller, such as a Networking or
Expansion device).
By default, this option is enabled.
Removing Device Connections
To remove a device connection:
1. Select a device in the system diagram and right-click to open the System Diagram context menu.
2. Select Remove Device Connections.
Alternatively, you can select Remove Connections from the Device menu. You can
also select a connection line and press Delete.
Connecting Devices by Device Type
Connecting Devices - Central Controllers
NetLinx Central Controllers have a single Output connection node, plus one Input connection node for
each of the port types on the device (FIG. 42).
FIG. 42
Connecting Devices - Central Controllers
VisualArchitect v1.1
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
Connecting Devices
63