AMX VISUALARCHITECT 1.1 Manual page 151

b. Verify (or edit if necessary) the file name of the NetLinx Studio Workspace (*.APW) file that
will be created.
7. Check the Include Module Files that are not part of the Workspace option.
Verify that the Keep Existing Folder Names option is unchecked.
8. Click on Export to export the Workspace file (including all module files) to the specified "To Go"
(*.AXW) file name and target directory.
9. Select Project > Import From Exported AXW File to access the Select a AXW File For
Extraction dialog (FIG. 115).
FIG. 115 Export Workspace Files To Go dialog
10. Locate and select the "To Go" (*.AXW) file you just created for this project, and click Open.
a. When you open a AXW file, NetLinx Studio will prompt you to specify a target directory to
extract the files contained in the AXW file to (in the Import From AXW File dialog - FIG. 116).
FIG. 116
Import From AXW File dialog
b. Click on Extract. NetLinx Studio may prompt you to verify new directories, if any were
indicated in the Extract To field (in the Import From AXW File dialog).
c. Click OK, and NetLinx Studio will indicate when the AXW File Extraction is complete
(FIG. 117). Click OK.
d. Once NetLinx Studio has opened the AXW file, it automatically opens the project, for editing or
transfer operations.
VisualArchitect v1.1
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
Finishing the Project
139