AMX VISUALARCHITECT 1.1 Manual page 46

Working With the Device Database
FIG. 21
R Code Capture and Management dialog - Properties tab of the Properties window
The IR properties listed here will vary depending on the device type selection, and represent the default
settings for that device type. In most cases, these default settings should suffice, but in some cases you
may need to edit some IR properties. You should consult the hand controller's documentation for device
specifications that may indicate changing some of the default IR properties.
Although the IR properties vary for each device type, there are some that are common to all devices:
Select any IR property to display a description of that property in the text field at the
bottom of the Properties window.
34
Module - The Device Class is a read-only field that indicates the Duet SDK class that this
device type implements.
IR Settings - These basic IR properties are common to all IR devices:
IR Mode: Click the drop-down menu to select either SET MODE IR (the default setting) or
SET MODE SERIAL.
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
VisualArchitect v1.1