Denon 2310CI - AVR AV Receiver Owner's Manual page 71

GVideoH
Symptom Cause
No picture • The connections between the
appears. AVR-2310 and monitor are faulty.
• The monitor's input setting is
wrong.
• PURE DIRECT mode is set.
• The player is connected using
the component input connectors,
the monitor is connected
using the video (yellow) output
connectors.
Picture cannot be • Input source does not match
recorded. recorder's video connection
connector (video).
DVDs cannot be
copied on a DVR.
–
The menu screen
and status
indicators are not
displayed.
• "OFF" is displayed for the
status.
• The main volume display is
"OFF" .
• The display during tuner operation
is "OFF" .
• The display during iPod operation
is "OFF" .
Countermeasure Page
• Check the connections. 13 ~ 18
• Set properly. –
• Cancel the PURE DIRECT mode. 45
• High definition (1080i/720p) and –
progressive (480p/576p) video
signals are not down-converted.
Set the player to interlace
(480i/576i) signals.
• The video conversion function 15
does not work for the REC
OUT connectors. Match the
input source and recorder
connections.
• This is not a malfunction. Most –
movie software includes copy
prevention signals and cannot be
copied.
• When viewing HDMI or 9
component video signals via the
AVR-2310, the GUI menu appears
MENU
when the button on the
MENU
main unit or the button on
the remote control unit.
• Set "Manual Setup" – "Option 32
Setup" – "GUI" – "Text" to
"ON" .
• Set "Manual Setup" – "Option 32
Setup" – "GUI" – "Master
Volume" to "Top" or "Bottom" .
• Set when "Manual Setup" 32
– "GUI" – "Tuner Information" is
not "OFF" .
• Set when "Manual Setup" 32
– "GUI" – " iPod Information" is
not "OFF" .
GHDMIH
Symptom Cause
HDMI audio • The "Manual Setup" – "HDMI
signals are not Setup" – "HDMI Audio Out"
output from setting is set to "TV" .
speakers.
No picture • The connections to the HDMI
appears connectors are faulty.
with HDMI • HDMI input setting is improper.
connections. • The monitor is not compatible
with copyright
(HDCP).
• The HDMI format of the player
and monitor do not match.
No sound is • The "Manual Setup" – "HDMI
output from Setup" – "HDMI Audio Out"
the monitor setting is set to "Amp" .
connected
with HDMI
connections.
When performing • HDMI's CEC function
the following operating.
operations on a
connected device,
AVR-2310 has the
same operations.
⋅ Power ON/OFF
⋅ Switching audio
output devices
⋅ Adjust volume
⋅ Switch input
source
Countermeasure
• Set to "Amp" .
• Check the connections.
• Check the HDMI input setting.
• Connect a monitor that is
protection compatible with copyright
protection (HDCP).
• Match the HDMI format of the
player and monitor.
• Set to "TV" .
is • Set "Manual Setup" – "HDMI
Setup" – "HDMI Control" to
"OFF" .
When you only want to operate
the power on/off each device, set
"Power Off Control" to "OFF" .
ENGLISH
Page
30
12
35
12
12
30
30