Converting Input Video Signals For Output (Video Conversion Function) - Denon 2310CI - AVR AV Receiver Owner's Manual

Converting Input video signals for Output
(Video Conversion Function)
The AVR-2310 is equipped with four types of video input/output terminals (HDMI, Component video, S-
Video and video).
Use the terminals according to the devices to be connected.
This function automatically converts various formats of video signals input to the AVR-2310 into the format
used to output the video signals from the AVR-2310 to a monitor.
Video device
Input
Output
(IN)
HDMI connector HDMI connector
Component video Component video
connectors connectors
S-Video connector S-Video connector
Video connector Video connector
• The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60
formats.
• The resolution of the video signal input to the AVR-2310's HDMI terminal is the resolution set at
"Resolution" (vpage 36). (1080p HDMI signals and 1080p component signals are output at 1080p,
regardless of the setting.)
AVR-2310
Monitor
Output
Input
(MONITOR OUT)
HDMI connector HDMI connector
Component video Component video
connectors connectors
S-Video connector S-Video connector
Video connector Video connector
: When 480i/576i signals are input
Set as Necessary
• Set when using the video conversion function.
"Video Convert" (vpage 36)
• Set when changing the resolution of the video signal.
"Resolution" (vpage 36)
Resolutions of HDMI-compatible TVs can be checked at "HDMI Information" (vpage 51).
NOTE
• HDMI signals cannot be converted into analog signals.
• When a non-standard video signal from a game machine or some other source is input, the video
conversion function might not operate.
• 480p/576p/1080i/720p/1080p component video input signals cannot be converted into S-Video or Video
format.
n Examples of GUI menu
• Menu screen • Status display screen
When the input source is
switched
M E N U
A u d i o / V i d e o A d j u s t
I n f o r m a t i o n
A u t o S e t u p
M a n u a l S e t u p
I n p u t S e t u p
I n p u t D V D
A d j u s t v a r i o u s a u d i o a n d v i d e o p a r a m e t e r s M o d e S T E R E O
Status display: The operating status is displayed temporarily on the
Important Information
When the volume is adjusted
M a s t e r V o l u m e - 8 0 . 0 d B
A u t o
screen when the input source is switched or the
volume is adjusted.
ENGLISH