Denon 2310CI - AVR AV Receiver Owner's Manual page 53

Owners manual
Table of Contents

Advertisement

Setting items
Dynamic EQ
ON : Use Dynamic EQ function.
OFF : Do not use Dynamic EQ function.
Audyssey
Dynamic
EQ™
solves
the
problem
of
W hen set to "ON", "
deteriorating sound quality
W hen "MultEQ" is set to "OFF" , "Dynamic EQ" is automatically set
as volume is decreased by
to "OFF"
taking into account human
T his can also be set by pressing
perception
and
room
acoustics.
Dynamic EQ : ON/Volume : OFF
This can be set when the
"MultEQ" (vpage 48)
is set to anything other
than "OFF" .
NOTE
"Tone Control" is set to "OFF" when "Dynamic EQ" is set to "ON" .
Reference Level Offset : "Audyssey Dynamic EQ" is referenced to the
standard film mix level. It makes adjustments to maintain the reference
response and surround envelopment when the volume is turned down
from 0 dB. However, film reference level is not always used in music or
other non-film content. The Dynamic EQ Reference Level Offset provides
three offsets from the film level reference (5 dB, 10 dB, and 15 dB) that can
be selected when the mix level of the content is not within the standard.
0dB (Film Ref) : This is the default setting and should be used when
listening to movies.
5dB : Select this setting for content that has a very wide dynamic range,
such as classical music.
10dB : Select this setting for jazz or other music that has a wider dynamic
range. This setting should also be selected for TV content as that is
usually mixed at 10 dB below film reference.
15dB : Select this setting for pop/rock music or other program material
that is mixed at very high listening levels and has a compressed dynamic
range.
Setting is enabled when "Dynamic EQ" is "ON" .
Remote control
operation buttons
Setting contents
" is displayed.
.
Dynamic EQ / Volume : OFF
"Red"
"Off"
"Green"
"OFF"
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items
Dynamic Volume
ON : Use Dynamic Volume. The Dynamic Volume effect will be at the level
of the "Setting" (vpage 49)
Audyssey Dynamic Volume™
Dynamic Volume solves the
OFF : Do not use Dynamic Volume.
problem of large variations
• When set to "ON" , "
in volume level between
• When "MultEQ" is set to "OFF", "Dynamic Volume" is automatically
television
programs,
set to "OFF".
commercials, and between
• This can also be set by pressing
the soft and loud passages
of movies.
Dynamic EQ / Volume : ON
This can be set when
"Dynamic EQ" (vpage
49) is set to "ON" .
Setting
Day : Low setting provides the least adjustments to the loudest and
softest of sounds.
Set Dynamic Volume effect.
Evening : Middle setting prevents loud and soft sounds from being much
This can be set when
louder and softer respectively than average sounds.
"Dynamic EQ" (vpage
Midnight : High setting affects volume the most, causing all sounds to be
49) is set to "ON" .
of equal loudness.
: Decision the setting
Setting contents
" is displayed.
.
Dynamic EQ : ON / Volume : OFF
"Green"
"Green"
"Red"
"Red"
: Return to previous menu
ENGLISH


Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-2310

Table of Contents