Denon 2310CI - AVR AV Receiver Owner's Manual page 70

ENGLISH
GAudioH
Symptom Cause
No sound is • You are playing a monaural source
produced from (TV, etc.) in the "STANDARD"
center speaker. (Dolby/DTS Surround) mode.
No sound • The surround mode is set to
is produced "STEREO" , "DIRECT" or "PURE
from surround DIRECT" .
speakers.
No sound is • The surround back speaker's
produced from power amplifier is assigned to a
surround back different channel.
speaker. • "S.Back" setting
"None" .
• The "Audio/Video
– "Audio Adjust" – "Surround
Back" settings are "OFF" .
• Surround mode not set to a mode
for 6.1- or 7 .1-channel playback.
No sound is • Subwoofer's power not turned
produced from on.
subwoofer. • The "Subwoofer" setting at
"Speaker Config. " is set to "No" .
• The subwoofer is not properly
connected.
• The subwoofer's
turned off.
DTS sound is not • Blu-ray Disc player / DVD player's
output. audio output setting is not set to
bitstream.
• Blu-ray Disc player / DVD player is
not compatible with DTS sound
playback.
• The AVR-2310's "Decode Mode"
setting is set to "PCM" .
HDMI audio • The "Manual Setup" – "HDMI
signals are not Setup" – "HDMI Audio Out"
output from setting is set to "TV" .
speakers.

Countermeasure
• The mode is set to something
other than "STANDARD" (Dolby/
DTS Surround).
• Set to a surround playback
mode.
• Check the setting and change it
as necessary.
is set to • Set to something other than
"None" .
Adjust" • Please set "Audio/Video Adjust"
– "Audio Adjust" – "Surround
Back" to settings other than
"OFF" .
• Select a surround playback
mode.
• Turn on the subwoofer's power.
• Set to "Yes" .
• Check the connections.
volume is • Adjust the subwoofer's volume
to an appropriate level.
• Set the Blu-ray Disc player / DVD
player. For details, refer to the
Blu-ray Disc player / DVD player's
operating instructions.
• Use a DTS-compatible player.
• Set to the "Auto" or "DTS"
mode.
• Set to "Amp" .
Symptom
Page No sound is • The "Manual Setup" – "HDMI
output from Setup" – "HDMI Audio Out"
44
the monitor setting is set to "Amp" .
connected
with HDMI
44, 45
connections.
Dolby TrueHD, • HDMI is not connected.
DTS-HD, Dolby • Blu-ray Disc player's audio output
Digital Plus audio setting is not set to bitstream.
27
is not output.
• Blu-ray
compatible with DTS sound
28
playback.
47
GiPodH
Symptom
iPod cannot be • The input source assigned to
44
played. "iPod Dock" is not selected.
• Cable is not properly connected.
–
• Control
adapter is not connected to
27
power outlet.
11
53
–
–
37
30
Cause Countermeasure
• Set to "TV" .
• Connect the HDMI.
• Set the Blu-ray Disc player. For
details, refer to the Blu-ray Disc
player's operating instructions.
Disc player is not • Use a DTS-compatible player.
Cause Countermeasure
• Switch to the input source
assigned at "iPod Dock" .
• Reconnect.
dock for iPod's AC • Plug the control dock for iPod's
AC adapter into a power outlet.
Page
30
12
–
–
Page
35
14
–